Ruijie RG-NBR6205-E

Storage

DDR4 SDRAM: 2 GB

BOOTROM: 8 MB

eMMC: 8 GB

SATA: 1 TB (Optional)

I/O Setup

8 copper ports. Supports 8 10/100/1000 M (copper) fast Ethernet ports and automatic recognition of network cables and cross-over cables.

By default, ports LAN0, LAN1, LAN2, LAN3, LAN4 and LAN5 are LAN ports, while ports WAN0 and WAN1 are WAN ports.

Ports LAN1, LAN2, LAN3, LAN4, LAN5 and WAN1 support WAN/LAN switchover.

2 SFP ports. Supports 1000BASE-SX/LX/ZX mini GBIC and GE-SFP-LX20/LH40-BIDI SFP modules.

By default, the SFP ports are WAN ports, and support WAN/LAN switchover.

     The router itself does not transmit optical signals. You must install an optical transceiver module on the switch to convert optical signals into electrical signals.

1 management port (in bridging mode)

1 console port

2 USB ports

Hardware Disk Module

1 hardware disk module (optional)

Hot Swapping

Hot swapping of hardware disk module: not support

Interface Standard

Ethernet: 10Base-T/100Base-TX/1000Base-TX, 1000BASE-SX/LX/ZX, 10GBASE-SR/LR/ZR

Console port: RS-232

Dimension (W x H x D)

440 mm x 43.6 mm x 200 mm (excluding the foot pad)

Voltage

100–240 V; 50/60 Hz

Power Consumption

Less than 25 W

Working Environment

Temperature: 0°C to 45°C      (32°F to 113°F)

Humidity: 10% to 90% RH (non-condensing)